Scrunchy Roller
Walls: 7" Roller #10818
Cut-ins: 4" Roller #10810

How To: Scrunchy Roller

Effect will vary based on color and technique.. always do a test area

Step 1: Clean and Prime

Step 2: Base Coat

Step 3: Apply Glaze

Step 4: Create the Effect

Clean Surface thoroughly. Remove all flaking or chalky paint. Seal surface with stain killer primer sealer (see store personnel) .

Allow primer to dry thoroughly. Paint on Off White base coat. This is your first color. Use a semi-gloss or eggshell coating.

Allow base coat to dry thoroughly. Apply a Light Blue glaze coat. This is your second color. Apply glaze sparingly.

While the glaze is still wet, roll dry Scrunchy Roller over surface, removing glaze to create effect (See package for Negative Application Method.) For best results use "buddy system": One person applies glaze while "buddy" creates effect behind. For additional colors and depth, repeat steps 3 and 4.
Remember: Effects vary. Do a test area.

WHIZZ Fabric Rollers are recommended:

WHIZZ Velour Rollers are recommended:

WHIZZ Velour or Sponge Rollers are recommended: