How To: BeeHive Roller and Sponge Pad

Effect will vary based on color and technique.. always do a test area

Step 1: Clean and Prime

Step 2: Base Coat

Step 3: Apply Glaze

Step 4: Create the Effect

Clean Surface thoroughly. Remove all flaking or chalky paint. Seal surface with stain killer primer sealer (see store personnel) .

Allow primer to dry thoroughly. Paint on Black base coat. This is your first color. Use a semi-gloss or eggshell coating.

Allow base coat to dry thoroughly. Apply a Red glaze coat. This is your second color. Apply glaze sparingly.

While the glaze is still wet, roll dry Beehive Roller over surface, removing glaze to create effect (See package for Negative Application Method.) For best results use "buddy system": One person applies glaze while "buddy" creates effect behind. Allow Red glaze to dry thoroughly. A final glaze of Gray is applied over effect utilizing Sponge Pad (See package for Positive Application Method.)
Use consistent method on complete project. For additional colors and depth, repeat steps 3 and 4.
Remember: Effects vary. Do a test area.

WHIZZ Fabric Rollers are recommended:

WHIZZ Velour Rollers are recommended:

WHIZZ Velour or Sponge Rollers are recommended: